Modeling the BNSF Lakes Subdivision in N Scale
May 26, 2022
In this article, I will be assembling a test girder for the Prairie River Bridge project. This girder was originally going to be a proof of concept, but it might make it into the final model. Everything is fabricated from 0.010" Evergreen styrene strips and sheet. I tried to use commercially available pieces as much
May 23, 2022
I started looking for a new AP project after the regional NMRA convention in Brainerd last weekend and decided to go with the Prairie River Bridge. I will be scratch building it in N scale as part of the bridge requirement for the Master Builder - Structures certificate. This will be the second of six
Jan 17, 2022
In this post of the Stuckum Glue Works seires, I will be adding the wooden water tank to the roof of the boiler room. This tank would have been used to store the water to be mixed with the raw materials used to create the glue. Water would be pumped up into the tank at
May 23, 2021
After attending the 2021 NMRA Thousand Lakes Resion convention in Bismark, North Dakota last weekend, I was inspired to start on the NMRA Achievement Program (AP). I decided to start with the Master Builder - Structures certificate and build the Stuckum Glue Works in N scale as my first project. This will be the first